Other • The PS profile defines a high-performance power solution, suitable for powering JAS nodes. The PS profile works alongside other nodes within the JAS architecture. The SMAC and Communications profile implement connectivity and data transfer from PS nodes to other nodes in the system. Power Supply Node The figure below illustrates...
Search
Power Supply Profile
Profile • The PS profile defines a high-performance power solution, suitable for powering JAS nodes. The PS profile works alongside the CH and RP profiles to implement groups of nodes (i.e., boxes) within the JAS architecture. The SMAC and Communications profile implement connectivity and data transfer from PS nodes to other nodes...
Pressure
Specification • The JAS structure shall meet all performance specifications during and after exposure to pressures varying from atmospheric to the space environment of 10-14 Torr. All thermal-vacuum ground based testing shall be conducted at pressures less than 10-6 Torr.
Pressure Change
Specification • The structure shall be designed to survive the change of pressure specified in the figure below. The launch and ascent pressure environment will lie between Pc(Max) and Pc(MIN). Pressure Change Within the envelope defined in figure above, the local rates of change will remain between the values shown in the...
Primary DC to DC Conversion
Profile • PS Node DC-DC Converters The PS node utilizes isolated DC-DC switching converter devices, which provide the primary power conversion capability for this node type. The DC-DC converter converts the primary bus voltage to a regulated secondary voltage that is distributed to the nodes in the system.
Primary Power Conversion
Specification • JAS will provide the capability to convert primary power to secondary power.
Primary Power Conversion Efficiency
Specification • The converter should be optimized for efficiency to reduce power consumption and avoid unnecessary heat generation through power dissipation. The exact design of the primary converter will depend upon the required efficiency and the exact nature of the input power.
Primary Power Conversion Galvanic Isolation
Specification • The primary power converter should provide galvanic isolation between the primary power and the secondary power.
Primary Power Conversion Noise Reduction
Specification • The converter should reduce or eliminate noise and/or fluctuations in the primary input power.
Primary Power Redundancy
Specification • JAS will implement the application requirements for primary power supply redundancy.
Results 181–190 of 263