Specification •
Search
Characteristics
Other • The table below describes the characteristics of JAS. Characteristic Definition Modularity Modular, scalable design capable of accommodating a wide range of applications, complexities and performance needs Configurable Topology Flexible, node-based, topologically configurable architecture that can be easily sized, configured and optimized to meet connectivity and robustness needs of a broad...
Cleanliness
Specification • Cleanliness is an important design consideration which can be mitigated by the mechanical structure and processes. Systems adjacent to an optical payload may have more strict cleanliness requirements than non-optical payload. The following sections describe the requirements which deal with Cleanliness considerations for the JAS mechanical structure.
Coating Surface Resistivity
Specification • The thickness of all chemical film treatments need to be controlled to provide low surface resistivity. Surface resistivity shall be less than 1 x 109 ohm/ square.
Coating Volume Resistivity
Specification • All paints and coatings shall have a volume resistivity less than 1 x 109 ohm-cm.
Coincidence Distribution
Other • The figure below illustrates how the JAS supports intra-payload coincidence and triggering. There are two options: Serial Packets JAS nodes can transmit packetized signals via the communications architecture if latency requirements are not too stringent. Discrete Signals Discrete coincidence and trigger signals can be added to any node through the...
Command and Host Processor Profile
Other • The Command and Host Processor (CH) profile defines a microprocessor-based solution suitable to construct nodes for mission data processing, spacecraft interfaces, and other applications requiring software execution on microprocessor platforms. Nodes based on the CH profile work alongside other nodes within the JAS architecture. The SMAC Profile and the Communication...
Command and Host Processor Profile
Profile • The Command and Host Processor (CH) profile defines a microprocessor-based solution suitable to construct nodes for mission data processing, spacecraft interfaces, and other applications requiring software execution on microprocessor platforms. The CH profile works alongside the RP Profile and PS Profile to implement nodes within the JAS architecture. The SMAC...
Communication Data Links
Specification • JAS nodes should communicate through one or more standard communications protocols. Serial communication protocols are the recommended approach but JAS does not preclude the use of parallel communication protocols. JAS also does not preclude the use of custom or legacy based communications.
Communication Profile
Profile • The Communication Profile defines standard interfaces for facilitating communication between RP, CH, and PS nodes within a JAS system. The Communication Profile focuses primarily on communication between payload applications. It leverages industry standards to support network-based communication using serial interfaces. A common set of communication protocols for space applications has...
Results 21–30 of 263